Awana® Pinewood Derby Big Wedge Car Body
Derby Dust Techs offer Awana® Pinewood Derby Big Wedge Car Body is ready for final sanding and paint. Awana® cars are not offered by many big hobby stores. As a result, you will have to make a wedge car yourself. Likewise you can use a Derby Dust® body prepared by one of our specialized tech's.
Awana® Pinewood Derby Big Wedge Car Body has already installed, balanced weights 120 grit sanding. Derby Dust Techs use the Goat Boy drilling station for axle holes. As a result know that your axles holes are drilled perfectly perpendicular to the body and parallel to the other side.
This attention to detail should save you a few hours time in your build and tuning. If you have limited tools, this Awana® Pinewood Derby Big Wedge Car Body is a great first time or kitchen-doable build.
No fancy tools.
No complicated scroll cuts.
Just a simple aerodynamic, wedge.
Even though we utilize a lighter pine block, there is still a good amount of wood weight.
Consequently, this car does not have an aggressive
COG.
Awana Big Wedge does not utilize an under pocket unless weighted with
tungsten cubes.
Two rear weight pockets filled with molten lead are covered with wood putty to bring this Awana® Pinewood Derby Big Wedge Car Body to weight.
Our slim wedges and ultra lite wedges are the racing machines of the wedge design.
Since those designs have cuts made with a CNC router be prepared to have a good build story after all is said and done.
Specifications
Made from an official BSA pine block, Awana® Pinewood Derby Big Wedge Car Body conforms to most rules.
- 7" in length
- 1.75" in width
- Weight to 120-125 g
- Trimmed the wood away from the front wheel rub areas so you can make a rail rider if desired.
- Average rear height is just over 1". Because of this, 2-3 degree camber wheels will be difficult if near impossible to install without the top of the wheels rubbing the body.
Derby Dust® offer’s a proven winning foundation to build your Champion. Most noteworthy our Pinewood Derby Car Body Classic Big Wedge comes with the following:
- Balanced for max COG
-
Axles holes drilled 3/32" in diameter
- Sanded to 220 grit finish
-
Finish Kit which include, gap gauge, foil tape for covering holes, and #44 drill bit for proper wheel install without damaging your axle slots.
- Wheel base: Drilled BSA distance or Extended Wheelbase. KNOW YOUR RULES!
- A 1.25″ diameter weight pocket on bottom of body may be present, but is not guaranteed.
Car Kit for this body is available here:
