Pinewood Wheel Bore Sealant

Wheel bore Sealant Instructions

1. Prepare your wheels for sealing.  Polish the bores prior to sealing for fastest results.  DO NOT try to apply sealant to wheels that already have graphite on them.  Sealant needs to go on raw plastic.
2. Take your pipe cleaner (provided) and blow on it vigorously with compressed air to remove any residual "fuzzies"  This will also increase the volume of the pipe cleaner to ensure adequate application surface.
3. Apply the sealant to the piper cleaner.  3-4 drops should be adequate to start with.  Apply as additional drops as needed between wheels.
4. Gently tread the pipe cleaner through the wheel bore and gently apply the treatment. The object is to get a thin coat of sealant on the hub bore and not wipe it out when removing the pipe cleaner.  BE SURE TO NOT SCRATCH the bore with the metal core of the pipe cleaner.
5. Wait 15 minutes for a semi cure.  Apply a burst of compressed air to the wheel bore to blow out any extras that you can't see
6. Allow 30 mins for the wax to cure to a haze.
7. Use the pipe cleaner to buff out the hub bore to a slick shiny gloss.
8. THEN WAIT 10 hours....  Yes, a long wait time!
9. Remove any extra on the wheel with a cotton swab prior to assembly and lube.