Pinewood Pro Body Slotter 

The Pro Body Slotter is the first tool of it’s kind for Pinewood Derby® racing.  It’s unique design allows new/accurate slots to be cut in the body block.  This helps meet the demand  Axles in the Slot” rule. New slots can be cut to replace improperly cut factory slots.  You can also re-locate the wheelbase for increased speed or custom design requirements. Or you can add slots to both sides of the block  to make a second car.  Pair with a “Pro Axle Guide” for perfect axle installation and wheel spacing and maximum performance.

How to Use Pinewood Pro Body Slotter

1. Simply mark the body block for the desired location of the new axle slots with a pencil and small carpenters square or ruler.
2. Install the tool over block and align the location marks on the tool with the marks on the block for the new slots. Snug the set screw to hold the Pro Body Slotter in place with the provided hex wrench.
3. Using a standard hack-saw with 2 blades (24 teeth per inch) inserted in opposite directions, place the blade into the machined slot in the tool and gently saw back and forth until the bottom of the tool is reached.

*** saw and  2 / 24 teeth per inch blades required ***

NEED some blank blocks?

Pro Slotter