Pinewood Derby Weight Minifig Block Lego® – LEAD

Pinewood Derby Weight Minifig Block Lego®

Pinewood Derby Weight Minifig Block Lego® is a great way to bring your race car to proper weight in style.  To achieve top speed, your pinewood derby car must weigh-in at the maximum allowable weight (generally 5 ounces).   Our lead weights come with flat bottoms that allow drilling (if needed) to remove excess weight.  If you make a thin ultralight body, probably the only way to add weight is to the top of the body.   As a result, this is a good solution to your problem.  This is a real working dimensional block.  Will accept all Lego®

LEGO® is a registered trademark of the LEGO® Group of companies which does not sponsor, authorize or endorse these programs or this web site.

Pinewood Derby Car weight Canopy Lead tungsten round dome cockpit Dimensions:

• 1 7/8 inches in length
• 1.25 inches in width
• 1/4 inches tall
• 2.oz to 4 oz in weight
• *Measurements are approx due to different densities of lead supply
• FOR CUSTOM WEIGHTS WE CAN NOT DO MOLDS GREATER THAN 4 OZ IN WEIGHT

Method of install is GLUE on.  The bottom of this canopy is flat.  This allows you to adjust the weight to get the perfect Center of Gravity.

Please cover all exposed lead with paint or some sort of physical barrier.   DO NOT sand lead without proper breathing equipment because  Lead dust can be harmful to children if inhaled or swallowed.  Consequently do not let you cub scout prepare the lead.  Wash all hands prior to any additional preparation.  Do not blow the dust off in an enclose work space.

PLEASE TAKE ALL NECESSARY PRECAUTIONS.  YOU HAVE BEEN NOTIFIED!

HOW TO PAINT LEAD…. HERE IS A GOOD START

Especially relevant to your cub scout health, painting unprotected or unpainted lead will seal the substrate and prevent it from causing harm.

Surface Preparation — First of all,  all surfaces must be clean, dry and free from anything that will interfere with the adhesion of the materials to be applied.  Allow to dry.

Priming — Prime overall with one full coat of primer in accordance with the manufacturer’s instructions. Allow a minimum drying time of 1 hour in normal drying conditions.