Pinewood Derby Wafer Car – Bullet

Pinewood Derby Wafer Car – Bullet

Pinewood Derby Wafer Car – Bullet is cnc laser cut BSA car body weigh in at bout 13 grams or so.  Design to be fast with a low profile design utilizing 1/4″ tungsten cubes or tungsten block ballasts.  Customize car to your liking or race as is!   1/4″ thick with veneer trunk top.  Designed be light and structurally.  This derby car  body comes in under 20 grams,  weighing in at 13 grams with veneer trunk. Infinite adjustable cog. Lots of push. Race it on a smooth track.   have done the major steps for you! You will still need at least 107 grams of weight to bring the car to proper weight even more with weight reduced wheels.

Take note, there is no messing around with this Pinewood wafer car body. Know what you are doing, use sharp bits, drill and build slow. If an axle is tight, run the provided bit through it again.  This body does not come with wheels or axles.  Due to its thickness, we highly suggest using a bent axle instead of trying to drill a high wheel as it will be too close to the top of the wood.

Wafer bodies are designed with minimum wood weight in mind. Since we remove a lot of the strength structure of the wood block, handle these bodies with care.  NO HAMMERING ever.  Because of this a #44 drill bit provided with each body to ensure easy proper axle install.  Race only on a smooth track!  RAIL RIDER SETUP highly suggested.

How to properly add weight

Take note, these derby wafer cars are not at racing weight.  Please properly plan for this.  Comes in around 13 grams so you will need about 112 grams of additional weight.  We offer tungsten kits and various lead toppers to customize to your liking, but it is highly suggested to use tungsten cubes or solid ballast.    Design is based on the 7 principles of having a fast pinewood derby car.  This body covers the low profile, lightweight, aerodynamic design.  COG is infinitely adjustable.

Made from an official BSA pinewood block, know this ultra light wafer design is always compliant with national rules when BSA slots are chosen.  It is necessary to know your rules before choosing our unique modifications for your PWD car.   If you are unsure about the terminology, just email us, we will get you what you need.

Options for this Car include:

• Wheelbase: BSA Slots, Drilled BSA Distance
• Unweighted or weighted body
• Finishing Kit available (Foil Tape, #44 Drill bit, 7 grams of Tungsten Putty)
• No wheels or axles come with this body
• Available in Kit Form