{"title":"OTHER SPEED PERFORMANCE PARTS","description":"","products":[{"product_id":"derby-worx-pro-body-tool-axle-jig","title":"Derby Worx Pro Body Tool Axle Jig","description":"\u003ch1\u003e\u003cstrong\u003ePinewood Derby Body Tool Axle Jig\u003c\/strong\u003e\u003c\/h1\u003e\r\nThe Body Block preparation is viewed to be the real foundation of FAST Pinewood Derby Car, and Derby Worx Pro Pinewood Derby Body Tool Axle Jig is primarily designed to straighten the existing axle’s slots or create the newest axle mounting holes. Through the utilization of just a hand drill and the properly sized drill, the Pro-Body Tool is easy to use for just anyone. This is also designed to work well on BSA as well as \u003cspan style=\"color: #3366ff;\"\u003e\u003ca style=\"color: #3366ff;\" href=\"https:\/\/www.derbydust.com\/product-category\/custom-pinewood-derby-car-kits\/\"\u003ePine Car Pinewood Derby car kits\u003c\/a\u003e\u003c\/span\u003e.\r\n\r\nPro-Body tool tends to improve the speed of your derby car in the following ways:\r\n\u003ch4\u003e\u003cem\u003eAxle Slot Preparation \u003c\/em\u003e\u003c\/h4\u003e\r\nFor the kits with axle slots, this tool ensures the right axle positioning using allowing you to drill proper axle pilot holes to existing axle slots with the hand drill. Pilot holes guarantees that the axles are properly mounted square. Improved accuracy on the axle mounting equates to higher speed.\r\n\u003ch4\u003e\u003cem\u003eAxle Hole Drilling with Pinewood Derby Body Tool Axle Jig\u003c\/em\u003e\u003c\/h4\u003e\r\nFor the races that allow axle holes, this tool serves as the guide for drilling precise axle holes with a hand drill. As mentioned, improved accuracy of axle mounting is equal to higher speed.\r\n\u003ch4\u003e\u003cem\u003eRaised Wheel Option using Pinewood Derby Body Tool Axle Jig\u003c\/em\u003e\u003c\/h4\u003e\r\nPro Body Tool comes with an additional hole for precise drilling of front axle in raised position and running on three wheels with additional friction reduction.\r\n\u003ch4\u003e\u003cem\u003eRe-drilling Axle Hole\u003c\/em\u003e\u003c\/h4\u003e\r\nFor the kits with a screw and about 3\/8” Dowel Rod Axle System, Pro Body tool enables you to re-drill axle pilot holes. When using the Pro-Axle Press as well as Pro body tool work closely together to come up with well aligned and smooth rolling cars.\r\n\r\nThe Derby Worx Pro Body Tool Axle Jig is now accessible and readily available online. Just make sure that you commit with a trusted supplier so that you can be confident of getting high quality products like this one.\r\n\u003ch2 style=\"margin: 0px; padding: 15px 0px; font-weight: lighter; color: #333333; font-size: 24px; font-family: Arial, Helvetica, sans-serif;\"\u003eInstructions for using Pinewood Derby Body Tool Axle Jig\u003c\/h2\u003e\r\n\u003cp style=\"margin: 0px; padding: 3px 0px 15px; line-height: 18px; color: #000000; font-family: Arial, Helvetica, sans-serif; font-size: 14px;\"\u003e\u003cstrong style=\"margin: 0px; padding: 0px;\"\u003eThe Pro-Body Tool is designed to accurately straighten existing axle slots or create new axle holes Using a hand drill on BSA and PineCar kits. The required \u003cspan style=\"color: #3366ff;\"\u003e\u003ca style=\"color: #3366ff;\" href=\"https:\/\/www.derbydust.com\/shop\/pinewood-derby-car-axle-wheel-drill-bit-size-44\/\"\u003e#44 drill bit\u003c\/a\u003e\u003c\/span\u003e is included.\u003c\/strong\u003e\u003c\/p\u003e\r\n\r\n\u003col style=\"margin: 10px 0px 10px 40px; padding: 0px; color: #000000; font-family: Arial, Helvetica, sans-serif; font-size: 14px;\"\u003e\r\n \t\u003cli style=\"margin: 0px; padding: 3px 0px;\"\u003eTest fit the Pro-Body tool on the bottom of the block with the two “ears” positioned on the sides of the block. If the tool will not fit onto the block, use coarse grit sandpaper to reduce the width of the block until the tool fits snuggly. If the tool is loose, tighten the fit by placing a piece of paper-folded as needed between one ear of tool and the block.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003ch3 style=\"margin: 0px; padding: 15px 0px; font-weight: lighter; color: #333333; font-size: 18px; font-family: Arial, Helvetica, sans-serif;\"\u003eTo create Pilot Holes in Axle Slots\u003c\/h3\u003e\r\n\u003col style=\"margin: 10px 0px 10px 40px; padding: 0px; color: #000000; font-family: Arial, Helvetica, sans-serif; font-size: 14px;\"\u003e\r\n \t\u003cli style=\"margin: 0px; padding: 3px 0px;\"\u003eUse a square to draw a straight line on one side of the car starting at the middle of the Axle slot, and extending to the top of the car. (Or measure the distance from one end of the block to the middle of an axle slot and transfer that measurement to the top-side of the block. Then use a ruler to draw a line from that measurement to the center of the axle slot).\u003c\/li\u003e\r\n \t\u003cli style=\"margin: 0px; padding: 3px 0px;\"\u003eRepeat step 1 for the other slot.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003ch3 style=\"margin: 0px; padding: 15px 0px; font-weight: lighter; color: #333333; font-size: 18px; font-family: Arial, Helvetica, sans-serif;\"\u003eTo Create New Axle Holes\u003c\/h3\u003e\r\n\u003col style=\"margin: 10px 0px 10px 40px; padding: 0px; color: #000000; font-family: Arial, Helvetica, sans-serif; font-size: 14px;\"\u003e\r\n \t\u003cli style=\"margin: 0px; padding: 3px 0px;\"\u003eMeasure and mark the desired position of the new axle holes on one side of the block. Extend the mark from the bottom of the block to the top of the block using a square (or measure and mark near the bottom of the block and near the top of the block, and then join the line with a pencil and ruler). Holes for extended wheelbase are typically positioned 5\/8” from the end of the block.\u003c\/li\u003e\r\n \t\u003cli style=\"margin: 0px; padding: 3px 0px;\"\u003eRepeat step 1 for the other end of the block.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003ch3 style=\"margin: 0px; padding: 15px 0px; font-weight: lighter; color: #333333; font-size: 18px; font-family: Arial, Helvetica, sans-serif;\"\u003ePosition the Tool\u003c\/h3\u003e\r\n\u003cul style=\"margin: 10px 0px 10px 40px; padding: 0px; color: #000000; font-family: Arial, Helvetica, sans-serif; font-size: 14px;\"\u003e\r\n \t\u003cli style=\"margin: 0px; padding: 3px 0px;\"\u003ePosition the tool on the bottom of the car with two “ears” on the sides of the block. Align the index mark with the line on the block. Clamp the tool in place.\u003c\/li\u003e\r\n \t\u003cli style=\"margin: 0px; padding: 3px 0px;\"\u003eHold the block firmly,position the drill bit in the hole,and slowly drill ¾” into the block.\u003c\/li\u003e\r\n \t\u003cli style=\"margin: 0px; padding: 3px 0px;\"\u003eWithout releasing the clamp,turn the tool and block over,and drill the second hole.\u003c\/li\u003e\r\n \t\u003cli style=\"margin: 0px; padding: 3px 0px;\"\u003eRepeat steps 4 to 5 for the other 2 holes.\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch2 style=\"margin: 0px; padding: 15px 0px; font-weight: lighter; color: #333333; font-size: 24px; font-family: Arial, Helvetica, sans-serif;\"\u003eTechnical Data for Pinewood Derby Body Tool Axle Jig\u003c\/h2\u003e\r\n\u003cp style=\"margin: 0px; padding: 3px 0px 15px; line-height: 18px; color: #000000; font-family: Arial, Helvetica, sans-serif; font-size: 14px;\"\u003eThe Pro Body Tool is designed as a drilling aid to help create correctly placed axle holes on the body or correct misaligned slots in stock blocks when rules require their use.\u003c\/p\u003e\r\n\r\n\u003col style=\"margin: 10px 0px 10px 40px; padding: 0px; color: #000000; font-family: Arial, Helvetica, sans-serif; font-size: 14px;\"\u003e\r\n \t\u003cli style=\"margin: 0px; padding: 3px 0px;\"\u003eThe Pro Body Tool easily places the axle holes perpendicular to the center-line of the car and ensures parallelism in the axles front to rear. This helps insure correct tracking of the car and aids in alignment.\u003c\/li\u003e\r\n \t\u003cli style=\"margin: 0px; padding: 3px 0px;\"\u003eThe Pro Body Tool locates all of the axle holes at the same height on the body which helps ensure the car is sitting square to the track, for a equally balanced car left to right and an aid in alignment.\u003c\/li\u003e\r\n \t\u003cli style=\"margin: 0px; padding: 3px 0px;\"\u003eThe Pro Body Tool helps guide the thin \u003cspan style=\"color: #3366ff;\"\u003e\u003ca style=\"color: #3366ff;\" href=\"https:\/\/www.derbydust.com\/shop\/pinewood-derby-car-axle-wheel-drill-bit-size-44\/\"\u003e#44 drill bit\u003c\/a\u003e\u003c\/span\u003e required to drill axle holes preventing deflection for a more accurate job. This is something that can not be done with a drill press plus due to the clearance required in the quill assembly in most hobbyist and home use drill presses to make the press work, there will most likely be some run-out in the drill chuck, this makes the Pro Body tool the most accurate choice plus only a hand drill is required for the job.\u003c\/li\u003e\r\n \t\u003cli style=\"margin: 0px; padding: 3px 0px;\"\u003eThe Pro Body Tool reduces friction!!! By correctly placing the axles in the body a builder will not have to bend or tweak the axles to get the car to run straight (this is the perfect foundation for the best possible Rail Rider™. By getting the axle placements in the correct position the builder will have to make minimal adjustments to get the desired alignment and prevent “Cross-Binding” in the car. This is where it takes excessive corrections in opposite directions to get a car to run straight or be a Rail Rider™ , while the car is going in the correct direction excessive load points have been created at friction points, the Pro Body Tool will prevent this.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\n\u003cobject style=\"width: 450px; height: 366px;\" data=\"\/\/www.youtube.com\/v\/j03ICABW7fE?color2=FBE9EC\u0026amp;version=3\" type=\"application\/x-shockwave-flash\" width=\"300\" height=\"150\"\u003e \u003cspan data-mce-type=\"bookmark\" style=\"display: inline-block; width: 0px; overflow: hidden; line-height: 0;\" class=\"mce_SELRES_start\"\u003e\u003c\/span\u003e\u003cparam name=\"movie\" value=\"\/\/www.youtube.com\/v\/j03ICABW7fE?color2=FBE9EC\u0026amp;version=3\"\u003e\n\u003cspan data-mce-type=\"bookmark\" style=\"display: inline-block; width: 0px; overflow: hidden; line-height: 0;\" class=\"mce_SELRES_end\"\u003e\u003c\/span\u003e \u003cparam name=\"allowFullScreen\" value=\"true\"\u003e \u003cparam name=\"allowscriptaccess\" value=\"always\"\u003e \u003c\/object\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":49870091092199,"sku":"SKU1141","price":15.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/1836\/8743\/files\/p-18811-pro-body-tool22.jpg?v=1719725505"},{"product_id":"javelin-pro-ss-pinewood-derby-axle","title":"JAVELIN Pro Pinewood Derby Axle","description":"\u003ch1 class=\"entry-title\" style=\"margin: 0px; padding: 15px 0px; font-weight: lighter; color: #333333; font-size: 28px;\"\u003eJAVELIN Pro Pinewood Derby Axle\u003c\/h1\u003e\r\nThe Javelin Pro Pinewood Derby Axle, like other variety of Derby Axle, is composed of the same purpose for the wheels, and it is to create a faster speed for your derby race. Javelin utilize a larger .093 inch bearing surface than the standard 0.088 BSA axle. This is for your Ultimate wheel central point to pivot fitment, predominant wheel strength, and unmatched speed. This Pinewood derby axle is made to create a perfect fit for the inner wheel. The main shaft is then reduced to a standard typical size of .088 at the tip of the nail.   This allows the Javelin in working with the openings located in every brand of Pinewood Derby Kits.\r\n\u003ch3\u003eJAVELIN Pro Pinewood Derby Axle Features:\u003c\/h3\u003e\r\n\u003cul\u003e\r\n \t\u003cli\u003eUpper shaft diameter: 0.093 inch\u003c\/li\u003e\r\n \t\u003cli\u003eLower shaft diameter: 0.088 inch\u003c\/li\u003e\r\n \t\u003cli\u003ePolished axle shaft great for graphite.  No additional work needed\u003c\/li\u003e\r\n \t\u003cli\u003eComes in a set of 4x axles\u003c\/li\u003e\r\n \t\u003cli\u003e\u003cstrong\u003eCURRENT STOCK DOES NOT PASS MAGNET TEST.\u003c\/strong\u003e\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nThis Pinewood Derby Axle is made to with a larger bore to ensure a better fit to the inner wheel hub to help prevent it on wobbling. This product also contains more specific features that can help the rider to have a more pleasant ride. It is also a need for every Derby enthusiast for them to be able to have their Pinewood Derby as best as it already is. You will not even the problem with the steel for it is already corrosion free, now the only thing you have to worry is getting back to the track.\r\n\r\nThis product has a chamfered polished finish to the head that the customer is looking for in one. This gives the best choice for your wanted product.   This Javelin Pinewood Derby Axle can be found at Derby Dust, and you can browse their website and other products you want. They also have a variety of Derby Axle that you can choose from in the market. No hesitations, for they give the best quality for your product. You can view their contact details and other information for further questions.","brand":"My Store","offers":[{"title":"Default Title","offer_id":49870091518183,"sku":"SKU143","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/1836\/8743\/files\/p-18796-javelin11-150x150.jpg?v=1719725542"},{"product_id":"pinewood-axle-polishing-kit","title":"Pinewood Axle Polishing Kit","description":"\u003ch1\u003ePinewood Axle Polishing Kit\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eDerby Dust has made available to you the parts we use to make our highly polished axles by offering our\u003c\/span\u003e\u003ca href=\"https:\/\/www.derbydust.com\/pinewood-axle-polishing-kit\/\"\u003e \u003cspan style=\"font-weight: 400;\"\u003ePinewood Axle Polishing Kit\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e.  Everything needed to POLISH axles.  First step to polishing is straightening out your axles.  Please don't forget this step.  Straighten axles with a\u003c\/span\u003e\u003ca href=\"https:\/\/www.derbydust.com\/shop\/pinewood-derby-axle-press-straightening-tool\/\"\u003e \u003cb\u003e\u003ci\u003ePro Axle Press\u003c\/i\u003e\u003c\/b\u003e\u003c\/a\u003e \u003cspan style=\"font-weight: 400;\"\u003eQuality tools and supplies to prepare your axles to mirror like finish include:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eOur\u003c\/span\u003e\u003ca href=\"https:\/\/www.derbydust.com\/product-category\/pinewood-derby-tooling\/\"\u003e \u003cspan style=\"font-weight: 400;\"\u003efine barrette jewelry file\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e is by far the best file for the job. This file is perfect to remove the burrs and shape your axle head prior to polishing.  5 1\/2 inches in length. With the tapered end, you can profile the head of your axle to the perfect angle. Fine checkering for minimal material removal. Only one cutting side, Rest sides are safe - meaning they do not cut.  No accidental material removal while shaping the head of your axle.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eAfter you have removed the crimps and the burrs, it is time to wet sand your axles polish to a mirror shine without leaving marks.  Derby Dust wet sandpaper assortment offers 10 different grits: 10000, 7000, 5000, 3000, 2000, 1500, 1000, 800, 600, 400\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cb\u003eGoing a Step above the rest for the win\u003c\/b\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eOnce your\u003c\/span\u003e\u003ca href=\"https:\/\/www.derbydust.com\/information\/pinewood-derby-graphite-dry-lube\/\"\u003e \u003cspan style=\"font-weight: 400;\"\u003egraphite lube\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e has been raced off, there is no lubrication between your axle and wheel bore.  To ensure that you have an advantage, the more friction you can reduce will give you the advantage over the next racer.  Polishing axles to a finer, mirror-like surface will reduce friction.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\n\u003cspan style=\"font-weight: 400;\"\u003eWet sanding can only do so much.  If you need a step up in a competitive pack, this is the next step. \u003c\/span\u003e\u003ca href=\"https:\/\/www.derbydust.com\/product-category\/pinewood-derby-graphite-lube\/\"\u003e\u003cspan style=\"font-weight: 400;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-weight: 400;\"\u003eDerby Dust Derby Axle Final Polish\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e brings a mirror shine to your axles.  PWD Experts state that higher\u003c\/span\u003e\u003ca href=\"https:\/\/www.derbydust.com\/final-polish-for-pinewood-derby-speed-axles\/\"\u003e \u003cspan style=\"font-weight: 400;\"\u003epolished derby axles\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e race faster. Our axle polish will allow you to create optimized axles for top speeds.  Use\u003c\/span\u003e\u003ca href=\"https:\/\/www.derbydust.com\/shop\/pinewood-derby-axle-polishing-compound\/\"\u003e \u003cspan style=\"font-weight: 400;\"\u003eDerby Axle Final Polish\u003c\/span\u003e\u003c\/a\u003e\u003cspan style=\"font-weight: 400;\"\u003e after wet sanding derby axles.  The super fine 0.25 micron diamond abrasive is in a paste suspension which is applied in a burnishing technique.  Typical application takes 30 seconds per axle.  Please have your axle sealant of choice ready for application after using the final polish.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eAfter final polish, you will need to protect your axles in with a rust preventive of some  if long term storage (greater than 48 hours) is intended before racing.  Rust inhibitor paper can be used.  Any metal sealant intended to prevent corrosion such as wd-40 can be used.  Or you can seal with a specialized metal sealant that contains rust preventive properties.  Always wipe clean with alcohol prior to racing.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eFinal assemble  p\u003c\/span\u003erior to racing, wipe axles with a silicone wax.   Yes it's Lemon Pledge...  The best for graphite.  Your axle is ready for graphite racing!\u003c\/p\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":49870092009703,"sku":"","price":20.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/1836\/8743\/files\/axle-polish-kit-scaled.jpg?v=1719725575"},{"product_id":"pinewood-derby-axle-install-and-wheel-remover","title":"Pinewood Derby Axle Install and Wheel Remover","description":"\u003ch1\u003ePinewood Derby Axle Install and Wheel Remover\u003c\/h1\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eI always wanted a Pinewood Axle Install Wheel Remover too that I could control. I have tried different ways of machining things in the past. Ideas come and go. Then the 3d printer came along and I made exactly what I needed. An axle install that is small enough to hold and manipulate with my fingers, easy enough to push with my thumb, strong enough to not break, gauged to set the axle at a center depth to always have a good gap for tuning.\u003c\/span\u003e \u003cspan style=\"font-weight: 400;\"\u003eAnd…. If I messed up, wedge the tool between the body and wheel so that it completely covers the wheel so that you can pull on it to extract the wheel without causing any additional harm to the wheel.  Even the 1 gram! Simple clean design. Easy to use!  Place the flat side on the wheels edge.  Slide until you hear the hub click into the recess, then pull the whole tool out to remove the wheel without any deflection or unnecessary stress.\u003c\/span\u003e \u003ca href=\"https:\/\/derbydust.com\/collections\/pinewood-derby-tools\/products\/pinewood-builders-tool-pack\"\u003e\u003cb\u003eCheck out our Builder's Kit for bundled tool kit\u003c\/b\u003e \u003cspan style=\"font-weight: 400;\"\u003e \u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cb\u003eHow to Install pinewood Axles using Axle Install Wheel Remover\u003c\/b\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003epredrill your pinewood axle holes with one of our specialty jigs.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eplace axle inside wheel bore without scratching inner bore\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eplace pinewood axle tip inside drilled hole\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003epress axle head with the top angled portion of the tool\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003epress tool until flush against wheel, the tool will automatically gap the axle head away from the wheel\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-weight: 400;\"\u003eHow to REMOVE pinewood wheel using wheel remover tool\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eplace flat edge against the pinewood wheel (angled side goes towards body)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eadvance tool towards center of derby wheel until you feel and hear a \"click\" which is the wheel hub setting in the recess portion of the tool\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"font-weight: 400;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003egently pull the wheel out ensuring the tool always remains against the entire wheel.  This ensures even pressure applied on the wheel hub and wheel edge which will eliminate any deflection of the wheel.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":49870092730599,"sku":"","price":1.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/1836\/8743\/files\/pusher8-scaled.jpg?v=1719725631"},{"product_id":"pinewood-derby-car-axle-guard","title":"Pinewood Derby Car Axle Guard","description":"\u003ch1\u003ePinewood Derby Car Axle Guard\u003c\/h1\u003e\r\n\u003ch4\u003ePack Rules are King.  Please check your RULES!!!  I know for a fact, some packs do not allow these.\u003c\/h4\u003e\r\nThis Pinewood Derby Axle Guard is an under-car plate with a ridge that slides right into the pre-cut axle groove to straighten and secure axle to the car's body. Its unique design allows for adequate track clearance and has no interference with car performance.\r\n\r\nIntroducing our innovative 3D Printed Pinewood Derby Axle Guards – the ultimate accessory to enhance your Pinewood Derby racing experience. Crafted with precision and engineered for performance, these axle guards are a must-have for any Pinewood Derby enthusiast. Designed to fit seamlessly onto your Pinewood Derby car, our axle guards are created using cutting-edge 3D printing technology. We understand the importance of a competitive edge, and that's why we've used high-quality materials to ensure durability and reliability during the race.\r\n\r\nThese axle guards serve a dual purpose: protecting your axles install and also providing a rough textured surface to help safely stop your car on the stop track.  The aerodynamic design of our axle guards is engineered to reduce friction and turbulence, allowing your car to glide effortlessly down the track. This streamlined shape minimizes air resistance, enabling your car to reach its maximum speed potential. Whether you're a seasoned Pinewood Derby racer or a first-time participant, you'll appreciate the difference these axle guards make.\r\n\u003ch3\u003eInstalling\u003c\/h3\u003e\r\nInstalling our 3D Printed Pinewood Derby Axle Guards is a breeze. They come with easy-to-follow instructions ensuring a snug fit.  Simply drill a small pilot hole, and screw into place with the provided screws.\r\n\r\nGet ready to dominate the competition and leave the competition in the dust with our 3D Printed Pinewood parts and tools!   Elevate your Pinewood Derby car's performance, protect your axles, and race with confidence. Order yours today and experience the thrill of victory on the Pinewood Derby track like never before. Don't just race – race to win with our Pinewood Derby Axle Guards!\r\n\r\n ","brand":"My Store","offers":[{"title":"Default Title","offer_id":49870095778023,"sku":"","price":3.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/1836\/8743\/files\/656990_Alignment-Axle-Guard_S3.jpg?v=1719725775"},{"product_id":"pro-axle-bender","title":"Pro Pinewood Axle Bender","description":"\u003ch1\u003ePinewood Axle Bender\u003c\/h1\u003e\r\nThe Pro Axle Bender is a fully adjustable Pinewood Derby Car Axle Bender.  The axle bender gives builders a wider range of bend angles.  Adjusting the stop collar with a 3\/32″ hex wrench, bend angles of 0.5° to 10° can be achieved for a \u003ca href=\"https:\/\/www.derbydust.com\/category\/tips\/pinewood-derby-tuning\/\"\u003ewide range of tuning options\u003c\/a\u003e.  This is an excellent upgrade from the hammer bending method.\r\n\r\nPinewood Axle Bender features:\r\n\u003cul\u003e\r\n \t\u003cli\u003eAdjustable stop w\/ adjustment markings\u003c\/li\u003e\r\n \t\u003cli\u003eBending chart,\u003c\/li\u003e\r\n \t\u003cli\u003eTool-less axle clamping\u003c\/li\u003e\r\n \t\u003cli\u003ePrevents distortion in multi-groove axles\u003c\/li\u003e\r\n \t\u003cli\u003eEliminates additional grooving at the bend point\u003c\/li\u003e\r\n \t\u003cli\u003eBend Stainless Steel or Titanium multi-groove axles with no modifications\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nThe Pinewood Axle Bender features a blade \u0026amp; Fork design pivot for accurate tracking and Derby Worx’s exclusive “Bending Cup” which allows stainless steel \u0026amp; titanium axles to be correctly bent without adding a groove or notch at the desired bend point. The main shaft has 3 machined rings which when matched with our bending chart takes the guesswork out axle bending and makes setting up your cars for a \u003ca href=\"https:\/\/www.derbydust.com\/product-category\/pinewood-derby-tooling\/\"\u003eRail Rider\u003c\/a\u003e or a straight on alignment a snap!\r\n\u003ch3\u003ePinewood Axle Bender Usage Instructions\u003c\/h3\u003e\r\nThe Pro Axle Bender is a fully adjustable tool for bending all Pinewood Derby Car axles.  The purpose of bent axles is alignment and tuning.  Derby Worx recommends using the Rail Rider™ method for ease of set up and maximum performance.\r\n\r\nTo use the Pinewood Axle Bender you will need a 3\/32” hex key wrench, a pointed Sharpie marker and prepped racing axles. (All burrs removed and polished)\r\n\u003col\u003e\r\n \t\u003cli\u003eMake a dot on the axle head with the Sharpie. This will be your reference mark for the bend as well as for installing and adjusting the axle in the car.\u003c\/li\u003e\r\n \t\u003cli\u003eMeasure 3\/8” or .370” from the axle head and place a dot on the axle shaft in line with the dot on the axle head. This is where the bend will occur and will provide the proper amount of axle for the wheel hub to ride on. This distance is a good reference for B.S.A. wheels, other wheels may require different bending points, and the tool is designed to accommodate all wheel types.\u003c\/li\u003e\r\n \t\u003cli\u003eLoosen the knurled thumb screw and lift the clamp cap. Insert the axle through from the inside placing the axle head in the cup machined in the lever. Place the dot on the axle head up at 12:00 and the dot on the shaft at the edge of the clamp cap and firmly tighten the knurled knob to hold the axle.\u003c\/li\u003e\r\n \t\u003cli\u003eUsing your 3\/32” hex key, loosen the set screw in the spring collar and slide it to the mark for the desired degree of bend and tighten.\u003c\/li\u003e\r\n\u003c\/ol\u003e\r\nNOTE: The bend chart is a guide line; always try a test axle first. If not possible, bend in small increments for the first axle.\r\n\u003ch3\u003eSettings\u003c\/h3\u003e\r\nB.S.A \/ D.W. Pro \/ Stainless \/ Titanium\r\n\r\nFull ——– 8º ——— 10º ——— 6º ——— 4º\r\n1 ———– 4º ———– 6º ——— 3º ——— 2º\r\n2 ———– 2º ———– 3º ——— 2º ——— 1º\r\n3 ———–.5º ———–.5º ——— 0º ——— 0º\r\n\r\n5. Place your thumb on the black knob.  Pull the lever smoothly and steady with your index finger until the spring fully compresses to bend the axle.\r\n\r\nTIP: A small amount of racing lubricant in the axle groove on the Pinewood Axle Bender lever will make for a smoother bending.\r\n\r\n\u003ca href=\"https:\/\/youtu.be\/ZpNRt0F1YXQ\"\u003e\u003cspan style=\"color: #0000ff;\"\u003eClick here to see it in action\u003c\/span\u003e\u003c\/a\u003e\r\n\r\nhttps:\/\/youtu.be\/ZpNRt0F1YXQ","brand":"My Store","offers":[{"title":"Default Title","offer_id":49870122909927,"sku":"SKU142","price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/1836\/8743\/files\/p-18793-proaxlebender.jpg?v=1719726852"},{"product_id":"titanium-2-groove-axles-titan-pro-pinewood-derby","title":"Titanium 2 Groove Axles - Titan Pro Pinewood Derby","description":"\u003cspan style=\"color: #333333; font-family: Arial, Helvetica, sans-serif; font-size: 28px; font-weight: lighter;\"\u003eTitanium 2 Groove Axles - Titan Pro\u003c\/span\u003e\r\n\r\nTitanium 2 Groove Axles are highly specialized Pinewood Derby design. These axles are precision machined on a Swiss C.N.C Turning Center for watch-maker type precision from titanium and then custom media polished for a slick \/ non-directional finish.\r\n\r\nThe grooves further reduce the friction. The slots also serve as a storage place for extra axle lubrication.  Groove axles are designed for speed in your cub’s Pinewood Derby races. However, they require special preparation for those speeds. You may need to help your cub with all the steps.\r\n\u003ch3\u003eTitanium 2 Groove Axles include:\u003c\/h3\u003e\r\n\u003cul\u003e\r\n \t\u003cli\u003eLarger 093\" diameter at the wheel area for a precision fit on all BSA wheels. This reduces friction and wheel wobble.\u003c\/li\u003e\r\n \t\u003cli\u003eThe main shaft of the Titanium axle is a standard .088\".\u003c\/li\u003e\r\n \t\u003cli\u003eHead of the Groove axle is the same size and radius as a standard BSA axle.\u003c\/li\u003e\r\n \t\u003cli\u003eBack of axle head is tapered slightly to reduce contact with the wheel.\u003c\/li\u003e\r\n \t\u003cli\u003eThe axle is 48% lighter than our other axles\u003c\/li\u003e\r\n \t\u003cli\u003eTitanium doesn't corrode so these axles will stay polished longer\u003c\/li\u003e\r\n \t\u003cli\u003eTitanium Axle has grooves to reduce friction and holds graphite during the race.\u003c\/li\u003e\r\n \t\u003cli\u003eMachine polished to a very fine mirror finish - ready to race!\u003c\/li\u003e\r\n \t\u003cli\u003eThese will \u003cspan style=\"color: #0000ff;\"\u003e\u003cstrong\u003eNOT PASS\u003c\/strong\u003e \u003c\/span\u003ea magnet test\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\n\u003ch3\u003ePolishing Axles\u003c\/h3\u003e\r\nNo additional polishing is needed.  However we do offer the 100K polishing service to further polish beyond the machining process.\r\n\u003cul\u003e\r\n \t\u003cli\u003eWorks well with Oil Lube\u003c\/li\u003e\r\n \t\u003cli\u003eWorks well with Graphite Lube\u003c\/li\u003e\r\n\u003c\/ul\u003e\r\nDuring the race day, your cub should observe the rules around lubrication. There may also need to be spot axle adjustments as the Pinewood Derby races continue, so keep your tools handy while you enjoy your cub’s race day.\r\n\u003cdiv\u003e\r\n\r\nTitanium 2 Groove Axles will work with the slots found in all brands of\u003cspan style=\"color: #3366ff;\"\u003e \u003ca style=\"color: #3366ff;\" href=\"https:\/\/www.derbydust.com\/product-category\/custom-pinewood-derby-car-kits\/\"\u003epinewood derby car kits\u003c\/a\u003e\u003c\/span\u003e or with both the Derby Worx Pro Body Tool \u0026amp; \u003cspan style=\"color: #3366ff;\"\u003e\u003ca style=\"color: #3366ff;\" href=\"https:\/\/www.derbydust.com\/shop\/derby-worx-pro-body-tool-axle-jig\/\"\u003ePro Body Tool Axle Jig\u003c\/a\u003e\u003c\/span\u003e for an excellent alignment! Derby Worx recommends either our “Pro Rail Rider Tool” or “Pro Axle Bender” for finishing tuning to a Rail Rider® alignment for maximum speed and performance.\r\n\u003cp style=\"margin: 0px; padding: 3px 0px 15px; line-height: 18px; color: #000000; font-family: Arial, Helvetica, sans-serif; font-size: 14px;\"\u003e\u003cb\u003eDerby Dust® is a authorized dealer of \u003ca href=\"https:\/\/www.derbyworx.com\/products\/axels\/ti-pro-2-groove\/\"\u003eDerby Worx® products.\u003c\/a\u003e\u003c\/b\u003e\u003c\/p\u003e\r\n\r\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":49870123663591,"sku":"SKU1432","price":34.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/1836\/8743\/files\/titan.jpg?v=1719726888"},{"product_id":"viper-pro-ss-2-groove-pinewood-derby-axle","title":"VIPER Pro 2 Groove Pinewood Derby Axle (x4 axles)","description":"\u003ch1 style=\"margin: 0px; padding: 15px 0px; font-weight: lighter; color: #333333; font-size: 28px; font-family: Arial, Helvetica, sans-serif;\" class=\"entry-title\"\u003eVIPER Pro 2 Groove\u003c\/h1\u003e\n\u003cp\u003eDerby Worx 2 groove pinewood axle - Viper Pro Speed Fast are designed with only one thing in mind… sheer speed. They are exactly like our Pro Tech Spring Steel Speed Axles but these axles have grooves to serve as lubrication reservoirs and to reduce wheel to axle contact. OLD PROBLEM: The official BSA Pinewood Derby wheels and axles simply do not fit each other very well at all. The wheel bore is much larger than the diameter of the axle shaft. This creates a sloppy fit and causes the wheels to wobble as the car races down the track. This wheel wobble severely decreases speed. NEW SOLUTION: These Derby Worx Viper 2-Groove Axles are the answer. The upper axle shaft diameter is .093” to make a perfect fit to the BSA Pinewood Derby wheel hub. The lower shaft is .088” in diameter to fit both drilled axle holes and standard BSA Pinewood Derby axle slots. These axles virtually eliminate all wheel wobble thus greatly improving the car’s speed.\u003c\/p\u003e\n\u003ch3\u003e2 groove pinewood axle - Viper Pro Features:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4x Axles\u003c\/li\u003e\n\u003cli\u003ePure high grade stainless steel\u003c\/li\u003e\n\u003cli\u003eCNC machined\u003c\/li\u003e\n\u003cli\u003eExtremely strong\u003c\/li\u003e\n\u003cli\u003eTwo grooves  for graphite retention\u003c\/li\u003e\n\u003cli\u003eChamfered and polished inner axle head\u003c\/li\u003e\n\u003cli\u003eMinimized wheel to axle contact\u003c\/li\u003e\n\u003cli\u003ePolished axle shaft\u003c\/li\u003e\n\u003cli\u003eNo crimp marks\u003c\/li\u003e\n\u003cli\u003eOuter head mimics official BSA axle\u003c\/li\u003e\n\u003cli\u003eUpper groove axle shaft dia: 0.093\"\u003c\/li\u003e\n\u003cli\u003eLower shaft dia: 0.088\"\u003c\/li\u003e\n\u003cli\u003eBetter wheel fit\u003c\/li\u003e\n\u003cli\u003eEliminates wheel wobble\u003c\/li\u003e\n\u003cli\u003eCorrosion free\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eCURRENT STOCK DOES NOT PASS MAGNET TEST \u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e2 groove pinewood axle - Viper Pro Speed Fast are machined of high grade spring steel. These axles are not only corrosion proof but are also crimp free and highly polished making them race ready and super fast. The shaft has two grooves to serve as lubrication reservoirs. The inside of the axle head is chambered to reduce the wheel to axle contact and diminish friction. The outer axle head is designed to mimic the head of the official BSA axle. For those that want to make these grooved axles rail riders, Derby Dust suggests only using the \u003cspan style=\"color: #3366ff;\"\u003e\u003ca href=\"https:\/\/www.derbydust.com\/shop\/pro-axle-bender\/\" style=\"color: #3366ff;\"\u003epinewood derby Pro Axle Bender Tool\u003c\/a\u003e\u003c\/span\u003e to ensure proper bend.  \u003cspan style=\"color: #3366ff;\"\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=ZpNRt0F1YXQ\" style=\"color: #3366ff;\"\u003eCheck out this tutorial to learn about the inner workings of the Pro Axle Bender Tool\u003c\/a\u003e\u003c\/span\u003e.\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cp style=\"margin: 0px; padding: 3px 0px 15px; line-height: 18px; color: #000000; font-family: Arial, Helvetica, sans-serif; font-size: 14px;\"\u003e \u003c\/p\u003e\n\u003c\/div\u003e","brand":"My Store","offers":[{"title":"Default Title","offer_id":49870124515559,"sku":"SKU1431","price":18.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0696\/1836\/8743\/files\/axel-specs-400x300-1_bc742173-c836-4c38-a809-8f5e0e716bbb.jpg?v=1719726930"}],"url":"https:\/\/derbydust.com\/collections\/pinewood-derby-car-axle-guard.oembed","provider":"Derby Dust","version":"1.0","type":"link"}